Grass Care Equipment Garden Care Equipment

The scarifying rake is designed to remove dead and matted grass from pasture land, paddocks and rough grassed areas. The rake may also be used for combing through most horse maneges, freshening up large drives and gravelled areas, etc. With the transport wheels removed and turning the rake upside down it becomes a useful tool for levelling seed beds, mole hills, etc. The rake is transported in the upside down position on the two wide profile wheels supplied with each rake. 

New for Gravel Drive Maintenance The tow bar on the SR2 has been redesigned so that the rake will tow in an angled position. A side blade is fitted to pull gravel in from the side which has been pushed to the edge.

All SCH Products are Built to order in the Uk Delivery time 3 to 4 Weeks

This rake has four rows of heavy duty spring coiled tines which will tease out the thatch and dead grass from paddocks and large grass areas. A weight tray on top of the unit allows ballast weight to be added to give extra penetration. Depth control wheels which also act as transport wheels are fitted as standard.

All SCH Products are Built to order in the Uk Delivery time 3 to 4 Weeks

Ideal for use on fine turf surfaces, cricket squares, tennis courts. bowling greens etc. Limited penetration multi toothed drums will penetrate the surface to alieviate the surface compaction. This allows air and nutrients to start their journey to the root system. When flood watering is carried out the multi holes disperse the water to the roots extremely quickly. A small roller is incorporated to iron out any small bumps. The roller also makes it easy to transport the unit from the shed to the pitch.

Spikes can be replaced when worn.

All SCH Products are Built to order in the Uk Delivery time 3 to 4 Weeks

Ideal for use on fine turf surfaces, cricket squares, tennis courts. bowling greens etc. Limited penetration multi toothed drums will penetrate the surface to alieviate the surface compaction. This allows air and nutrients to start their journey to the root system. When flood watering is carried out the multi holes disperse the water to the roots extremely quickly. A small roller is incorporated to iron out any small bumps. The roller also makes it easy to transport the unit from the shed to the pitch. 

Spikes can be replaced when worn.

All SCH Products are Built to order in the Uk Delivery time 3 to 4 Weeks

Ideal for use on fine turf surfaces, cricket squares, tennis courts. bowling greens etc. Limited penetration multi toothed drums will penetrate the surface to alieviate the surface compaction. This allows air and nutrients to start their journey to the root system. When flood watering is carried out the multi holes disperse the water to the roots extremely quickly. A small roller is incorporated to iron out any small bumps. The roller also makes it easy to transport the unit from the shed to the pitch.

Spikes can be replaced when worn.

All SCH Products are Built to order in the Uk Delivery time 3 to 4 Weeks

By teasing out the thatch and moss from your lawn you will make it more resistant to drought, insects and disease problems. By removing this layer of thatch the grassed area will regenerate naturally and will become more receptive to fertilisers and other pests and disease control products. The SCH rotary raker with its powerful 5.5Hp Honda petrol engine and twin 'v' belt drive rotates four rows of free floating scarifying blades which carry out the vital dethatching process.
For areas that are inaccessible to the garden tractor the unit can be manually operated with easy attachable handle which is provided with the machine.

All SCH Products are Built to order in the Uk Delivery time 3 to 4 Weeks

The roller/tool carrier (Ref: BRT) is the basic tool carrier for the SCH 915mm (36") grass care system. This item has to be purchased to use the 36in attachments.
The garden roller may be water ballasted for extra weight. The option of additional weight if required, can be placed in the weight tray.

Working Width: 915mm (36")

Diameter: 360mm (14")

Weight unballasted: 36kg (80lbs)

Water ballasted: 122kg (270lbs)

All SCH Products are Built to order in the Uk Delivery time 3 to 4 Weeks

This unit must be used in conjunction with the 36" roller/tool carrier

The slitter is designed to break down the surface pan of the grass to improve drainage and air penetration to the roots.

Working width  915mm (36in)

All SCH Products are Built to order in the Uk Delivery time 3 to 4 Weeks

This unit must be used in conjunction with the 36" roller tool carrier

The aerator is for breaking down the surface pan of the grass to improve drainage and air penetration to the roots. The aerator is specifically designed for Autumn and early Spring use, whilst the slitter can be used during other months throughout the year.
 

Penetration depth: up to 75mm (3in)

Working width: 915mm (36in)

All SCH Products are Built to order in the Uk Delivery time 3 to 4 Weeks

Must be used in conjunction with the 36" roller/tool carrier

A multi spring tined unit which will tease out moss and dead thatch from lawns. The moss rake can also be used for "freshening up" gravel drives.

Working width  915mm (36in)

All SCH Products are Built to order in the Uk Delivery time 3 to 4 Weeks

Must be used in conjunction with the 36" roller/tool carrier

A multi spring tined unit which will tease out moss and dead thatch from lawns. The moss rake can also be used for "freshening up" gravel drives.

Working width  915mm (36in)

All SCH Products are Built to order in the Uk. Delivery time 3 to 4 Weeks

IMPORTANT!

The heavy duty carrier frame must be purchased in order to use the system. This heavy duty system is built around the carrying frame. The frame consists of the tow bar, weight tray, two transport wheels and two ballast tanks. The tow bar is now height adjustable.

Overall width:  1250mm (49")

All SCH Products are Built to order in the Uk. Delivery time 3 to 4 Weeks

An optional extra for the frame is our frame lifting unit (Ref: HGL).The main advantages of fitting the lifting kit are:

1) The various attachments can be raised out of work at run ends.

2) Lifting the attachment out of work allows the frame to be reversed.

3) Transportation to and from the mower shed is a simple task.

4) The lifter can be fitted to frames already in operation.

A useful extra but not essential

All SCH Products are Built to order in the Uk. Delivery time 3 to 4 Weeks

This unit must be used in conjuction with the Heavy Duty Carrier Frame.

The carrier frame fitted with the heavy duty dethatcher. Comprises of two rows of staggered shock coiled tines which will tease out heavily matted grass and encourage tillering during the growing season. The DTC can also be used to "freshen up" gravel drives, paths and horse arenas. The two 25 litre ballast containers supplied with the carrying frame, can be used for extra weight if required. The transport wheels make transportation from the place of storage to the work area an easy operation.

Working width: 1020mm (40")
Water ballasted: 90kg

All SCH Products are Built to order in the Uk. Delivery time 3 to 4 Weeks

This unit must be used in conjuction with the Heavy Duty Carrier Frame.

The carrier frame fitted with the heavy duty slitter is an ideal tool to improve drainage and root growth to grassed areas, especially in late spring and wet summers. Well drained grassed areas will help towards the prevention of moss. The two 25 litre ballast containers supplied with the carrying frame, when full, will provide extra weight to drive in the slitters. The slitters have springs fitted between, to keep correct spacing between stars.
The transport wheels make transportation from the place of storage to the work area an easy operation

Working width: 1020mm (40")
Weight ballasted with water: 90kg

All SCH Products are Built to order in the Uk. Delivery time 3 to 4 Weeks

This unit must be used in conjuction with the Heavy Duty Carrier Frame

The carrier frame fitted with the heavy duty aerator is an ideal tool for Autumn use breaking down the surface pan of grassed areas, improving drainage and allowing air penetration to the roots. The two 25 litre ballast containers supplied with the carrying frame, when full, will provide added weight to help penetrate hard surfaces. The transport wheels make transportation from the place of storage to the work area an easy operation.

Working width: 1020mm (40")
Weight ballasted with water: 90kg

All SCH Products are Built to order in the Uk. Delivery time 3 to 4 Weeks

This unit must be used in conjuction with the Heavy Duty Carrier Frame.

The carrier frame fitted with the firming roller is a new addition to the SCH heavy duty system. Its purpose is to "firm up" grassed areas in the spring before the heavy growth period commences.

Working width: 915mm (36") Domed ends
Diameter: 250mm (10")
Weight ballasted with water: 90kg

All SCH Products are Built to order in the Uk. Delivery time 3 to 4 Weeks

This unit must be used in conjuction with the Heavy Duty Carrier Frame.
Two rows of stiff brushes make up this attachment.
The brush attachment once fitted to the carrier frame, will brush in top dressings and lawn sand. It will also put those much-admired stripes into the lawn.

Working Width: 1020mm (40")

All SCH Products are Built to order in the Uk. Delivery time 3 to 4 Weeks

This unit must be used in conjuction with the Heavy Duty Carrier Frame.

The carrier frame fitted with the heavy duty moss rake attachment containing one row of spring tines will tease out moss and dead thatch from lawns. This lighter rake is an ideal unit on finer grassed areas, such as tennis courts and finely cut lawns. The rake can also be used for freshening up gravel drives.

Working width: 1020mm (40")

All SCH Products are Built to order in the Uk. Delivery time 3 to 4 Weeks

This unit must be used with the Heavy Duty Carrier Frame

The hollow tine corer attachment has been added to the existing range of lawn care implements for the 1020mm (40") system. The HGHT, like the other attachments, fits easily into the carrier frame. The hollow, specially shaped tines plunge into the grass and removes a 'plug' of soil and turf, when the tine goes into the turf next time round it pushes out the previous core. The hollow tine corer leaves a neat round hole, to allow top dressing and fertiliser to easilly reach the roots where they are most needed.

We strongly recommend the frame lifter (Ref HGL) is used with this attachment.

Working Width: 1020mm (40")

No of tines per disc: 4

No of discs: 8

All SCH Products are Built to order in the Uk. Delivery time 3 to 4 Weeks

This unit must be used in conjuction with the Heavy Duty Carrier Frame.

The lute attachment is easily fitted to the heavy duty frame. The lute is a useful tool for levelling soil areas prior to seeding. The lute will level and freshen up sand menages leaving a smooth level surface. The lute may also be used on gravel driveways, or to level out molehills on the lawn.

Working Width: 1020mm (40")

The carrier frame lifter (Ref: HGL) is advised when using the lute.

All SCH Products are Built to order in the Uk. Delivery time 3 to 4 Weeks

This unit must be used in conjuction with the Heavy Duty Carrier Frame.

The sprayer attachment clips onto the carrier frame. The chemical is carried in the two 25 litre containers supplied with the sprayer. The 12 volt power sprayer pump is powered from the tractor battery. The sprayer is ideal for applying fertiliser and/or weed killers to grassed areas. A brass lance is supplied with a wedge nozzle giving 915cm (36") 

A three nozzle boom spray is supplied with this sprayer.

Manual Spraying - the trigger lance is ideal for spraying insecticides on fruit trees, shrubs and roses, it can also be used for spraying herbicides onto nettles, docks etc.

All SCH Products are Built to order in the Uk. Delivery time 3 to 4 Weeks

The storage stand keeps your attachments safely in one place.  Attachments with protruding profiles are kept in such a way to minimise unwanted contact with them. 

This stand is only suitable for the 40" range of lawn care attachments

All SCH Products are Built to order in the Uk. Delivery time 3 to 4 Weeks

Important!
The 48" frame must be purchased in order to use this system. The frame consists of two transport and depth control wheels which are adjusted by winding down jacklegs. The wheels are pneumatic wide profile with bearings. The frame has a weight tray and is supplied with three 25 litre water fillable ballast tanks. The towed carrier frame has an adjustable tow bar to accommodate most garden tractors drawbar heights.

Overall width: 1750mm (69")

Un ballasted weight: from 60kg

Ballasted weight: 135kg

All SCH Products are Built to order in the Uk. Delivery time 3 to 4 Weeks

This unit must be used in conjunction with either the towed or mounted frame. 

IMAGE SHOWS UNIT ATTACHED TO THE CARRIER FRAME – PURCHASE FRAME SEPARATELY – F48T OR F48M

The hollow tine corer attachment has been added to the existing range of lawn care implements for the 1220mm (48") system. The HG48, like the other attachments, fits easily into the carrier frame. The hollow, specially shaped tines plunge into the grass and remove a 'plug' of soil and turf when the tine goes into the turf next time round it pushes out the previous core. The hollow tine corer leaves a neat round hole, to allow top dressing and fertiliser to easily reach the roots where they are most needed.  Maximum core depth 75mm (3")

Working Width: 1220mm (48")

No of tines per disc: 4

No of discs: 8

All SCH Products are Built to order in the Uk. Delivery time 3 to 4 Weeks

This unit must be used in conjunction with either the towed or mounted frame. 

IMAGE SHOWS UNIT ATTACHED TO THE CARRIER FRAME – PURCHASE FRAME SEPARATELY – F48T OR F48M

The carrier frame fitted with the slitter attachment is an ideal tool to improve drainage and stimulate root growth to grassed areas, especially in late spring and wet summers. Well-drained areas will help towards the prevention of moss. The three 25 litre ballast containers supplied with the frame, when full, will provide ample weight to drive the slitter blades into the ground.

Working width: 1220mm (48")
Weight ballasted with water: 150kg

All SCH Products are Built to order in the Uk. Delivery time 3 to 4 Weeks

This unit must be used in conjunction with either the towed or mounted frame. 

IMAGE SHOWS UNIT ATTACHED TO THE CARRIER FRAME – PURCHASE FRAME SEPARATELY – F48T OR F48M

The carrier frame fitted with the aerator attachment is an ideal tool for autumn use breaking down the surface pan of grassed areas, improving drainage and allowing air penetration to the roots. The three 25 litre tanks, when filled with water, provide ample weight to help penetrate hard surfaces.

• Working Width: 1220mm (48")
• Weight Ballasted with water: 150kg
• All SCH Products are Built to order in the Uk. Delivery time 3 to 6 Weeks

This unit must be used in conjunction with either the towed or mounted frame. 

IMAGE SHOWS UNIT ATTACHED TO THE CARRIER FRAME – PURCHASE FRAME SEPARATELY – F48T OR F48M

The carrier frame fitted with the 48" dethatcher, comprises of four rows of staggered shock coiled tines which will tease out heavily matted grass and encourage tillering during the growing season. The D48 can also be used to freshen up gravel driveways, paths and horse arenas. The three 25 litre ballast containers supplied with the carrier frame, can be used for extra weight if required.
 

• Working width: 1220mm (48")
• Ballasted Weight: 167kg
• All SCH Products are Built to order in the Uk. Delivery time 3 to 4 Weeks

This unit must be used in conjunction with either the towed or mounted frame 

IMAGE SHOWS UNIT ATTACHED TO THE CARRIER FRAME – PURCHASE FRAME SEPARATELY – F48T OR F48M. 

The carrier frame fitted with the roller attachment is an ideal tool to "firm up" grassed areas in the spring before the heavy growth period.

Working width: 1150mm (46")
Diameter: 360mm (14")
Weight ballasted with water: 150kg

All SCH Products are Built to order in the Uk. Delivery time 3 to 4 Weeks

This unit must be used in conjunction with either the towed or mounted frame. 

IMAGE SHOWS UNIT ATTACHED TO THE CARRIER FRAME – PURCHASE FRAME SEPARATELY – F48T OR F48M

The Sorrel roller attachment is ideal to break up the crust that forms on compacted soil. The spikes penetrate the surface which allows the air, nutrients and especially water, to start their journey into the roots. 

• Working Width: 1220mm (48")
• Roller diameter (without tines): 200mm (8")
• Tine Penetration: 63mm (2 1/2")
• Number of tines: 200
• Unit weight: 32kg
• All SCH Products are Built to order in the Uk. Delivery time 3 to 4 Weeks

This unit must be used in conjunction with either the towed or mounted frame. 

IMAGE SHOWS UNIT ATTACHED TO THE CARRIER FRAME – PURCHASE FRAME SEPARATELY – F48T OR F48M

The brush attachment will brush into lawns top dressing and lawn sand. It will put those much-admired stripes into the lawn. It can also be used on artificial playing surfaces.

Working Width: 1220mm (48")

All SCH Products are Built to order in the Uk. Delivery time 3 to 4 Weeks

This unit must be used in conjunction with either the towed or mounted frame. 

IMAGE SHOWS UNIT ATTACHED TO THE CARRIER FRAME – PURCHASE FRAME SEPARATELY – F48T OR F48M

The lute is a useful tool for levelling soil areas prior to seeding. The lute will level and freshen up sand menages leaving a smooth level surface. The lute may also be used on gravel drives, or to level out molehill on the lawn.

Working width: 1220mm (48")
Weight Ballasted with water: 150kg

All SCH Products are Built to order in the Uk. Delivery time 3 to 4 Weeks

This unit must be used in conjunction with either the towed or mounted frame. 

IMAGE SHOWS UNIT ATTACHED TO THE CARRIER FRAME – PURCHASE FRAME SEPARATELY – F48T OR F48M

The 48" Power sprayer attachment attaches to the weight tray of the carrier frame. A 12-volt diaphragm pump, powered from the towing tractor, pumps the herbicide fertilisers etc, to a three nozzle spray boom. A hand lance is supplied as standard with the unit for spot spraying.

• Tank capacity: 70 Litres (15 Gallons)
• Spraying Width: 1900mm (75")
• Pump Delivery: 7 l/min (max)
• All SCH Products are Built to order in the Uk. Delivery time 3 to 4 Weeks